dmesg - 2 x Intel Xeon E5-2680 v2
microcode: microcode updated early to revision 0x42e, date = 2019-03-14
Linux version 6.1.30-1-lts (linux-lts@archlinux) (gcc (GCC) 13.1.1 20230429, GNU ld (GNU Binutils) 2.40.0) #1 SMP PREEMPT_DYNAMIC Wed, 24 May 2023 17:18:57 +0000
Command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed copytoram initrd=boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/sysresccd.img
x86/fpu: Supporting XSAVE feature 0x001: 'x87 floating point registers'
x86/fpu: Supporting XSAVE feature 0x002: 'SSE registers'
x86/fpu: Supporting XSAVE feature 0x004: 'AVX registers'
x86/fpu: xstate_offset[2]: 576, xstate_sizes[2]: 256
x86/fpu: Enabled xstate features 0x7, context size is 832 bytes, using 'standard' format.
signal: max sigframe size: 1776
BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x00000000000953ff] usable
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x00000000bda1afff] usable
BIOS-e820: [mem 0x00000000bddac000-0x00000000bddddfff] ACPI data
BIOS-e820: [mem 0x00000000bddde000-0x00000000cfffffff] reserved
BIOS-e820: [mem 0x00000000fec00000-0x00000000fee0ffff] reserved
BIOS-e820: [mem 0x00000000ff800000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000203fffefff] usable
NX (Execute Disable) protection: active
SMBIOS 2.8 present.
DMI: HP ProLiant DL360p Gen8, BIOS P71 07/01/2015
tsc: Fast TSC calibration using PIT
tsc: Detected 2793.367 MHz processor
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
last_pfn = 0x203ffff max_arch_pfn = 0x400000000
x86/PAT: Configuration [0-7]: WB WC UC- UC WB WP UC- WT
last_pfn = 0xbda1b max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000f4f80-0x000f4f8f]
Using GB pages for direct mapping
RAMDISK: [mem 0x7c28f000-0x7fffffff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x00000000000F4F00 000024 (v02 HP )
ACPI: XSDT 0x00000000BDDAED00 0000E4 (v01 HP ProLiant 00000002 \xd2? 0000162E)
ACPI: FACP 0x00000000BDDAEE40 0000F4 (v03 HP ProLiant 00000002 \xd2? 0000162E)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm1aControlBlock: 32, using default 16 (20220331/tbfadt-669)
ACPI BIOS Warning (bug): Invalid length for FADT/Pm2ControlBlock: 32, using default 8 (20220331/tbfadt-669)
ACPI: DSDT 0x00000000BDDAEF40 0026DC (v01 HP DSDT 00000001 INTL 20030228)
ACPI: FACS 0x00000000BDDAC140 000040
ACPI: FACS 0x00000000BDDAC140 000040
ACPI: SPCR 0x00000000BDDAC180 000050 (v01 HP SPCRRBSU 00000001 \xd2? 0000162E)
ACPI: MCFG 0x00000000BDDAC200 00003C (v01 HP ProLiant 00000001 00000000)
ACPI: HPET 0x00000000BDDAC240 000038 (v01 HP ProLiant 00000002 \xd2? 0000162E)
ACPI: FFFF 0x00000000BDDAC280 000064 (v02 HP ProLiant 00000002 \xd2? 0000162E)
ACPI: SPMI 0x00000000BDDAC300 000040 (v05 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: ERST 0x00000000BDDAC340 000230 (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: APIC 0x00000000BDDAC580 00026A (v01 HP ProLiant 00000002 00000000)
ACPI: SRAT 0x00000000BDDAC800 000750 (v01 HP Proliant 00000001 \xd2? 0000162E)
ACPI: FFFF 0x00000000BDDACF80 000176 (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: BERT 0x00000000BDDAD100 000030 (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: HEST 0x00000000BDDAD140 0000BC (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: DMAR 0x00000000BDDAD200 00051C (v01 HP ProLiant 00000001 \xd2? 0000162E)
ACPI: FFFF 0x00000000BDDAEC40 000030 (v01 HP ProLiant 00000001 00000000)
ACPI: PCCT 0x00000000BDDAEC80 00006E (v01 HP Proliant 00000001 PH 0000504D)
ACPI: SSDT 0x00000000BDDB1640 0007EA (v01 HP DEV_PCI1 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB1E40 000103 (v03 HP CRSPCI0 00000002 HP 00000001)
ACPI: SSDT 0x00000000BDDB1F80 000098 (v03 HP CRSPCI1 00000002 HP 00000001)
ACPI: SSDT 0x00000000BDDB2040 00038A (v02 HP riser0 00000002 INTL 20030228)
ACPI: SSDT 0x00000000BDDB2400 000385 (v03 HP riser1a 00000002 INTL 20030228)
ACPI: SSDT 0x00000000BDDB27C0 000BB9 (v01 HP pcc 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB3380 000377 (v01 HP pmab 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB3700 005524 (v01 HP pcc2 00000001 INTL 20120503)
ACPI: SSDT 0x00000000BDDB8C40 00621C (v01 INTEL PPM RCM 00000001 INTL 20061109)
ACPI: Reserving FACP table memory at [mem 0xbddaee40-0xbddaef33]
ACPI: Reserving DSDT table memory at [mem 0xbddaef40-0xbddb161b]
ACPI: Reserving FACS table memory at [mem 0xbddac140-0xbddac17f]
ACPI: Reserving FACS table memory at [mem 0xbddac140-0xbddac17f]
ACPI: Reserving SPCR table memory at [mem 0xbddac180-0xbddac1cf]
ACPI: Reserving MCFG table memory at [mem 0xbddac200-0xbddac23b]
ACPI: Reserving HPET table memory at [mem 0xbddac240-0xbddac277]
ACPI: Reserving FFFF table memory at [mem 0xbddac280-0xbddac2e3]
ACPI: Reserving SPMI table memory at [mem 0xbddac300-0xbddac33f]
ACPI: Reserving ERST table memory at [mem 0xbddac340-0xbddac56f]
ACPI: Reserving APIC table memory at [mem 0xbddac580-0xbddac7e9]
ACPI: Reserving SRAT table memory at [mem 0xbddac800-0xbddacf4f]
ACPI: Reserving FFFF table memory at [mem 0xbddacf80-0xbddad0f5]
ACPI: Reserving BERT table memory at [mem 0xbddad100-0xbddad12f]
ACPI: Reserving HEST table memory at [mem 0xbddad140-0xbddad1fb]
ACPI: Reserving DMAR table memory at [mem 0xbddad200-0xbddad71b]
ACPI: Reserving FFFF table memory at [mem 0xbddaec40-0xbddaec6f]
ACPI: Reserving PCCT table memory at [mem 0xbddaec80-0xbddaeced]
ACPI: Reserving SSDT table memory at [mem 0xbddb1640-0xbddb1e29]
ACPI: Reserving SSDT table memory at [mem 0xbddb1e40-0xbddb1f42]
ACPI: Reserving SSDT table memory at [mem 0xbddb1f80-0xbddb2017]
ACPI: Reserving SSDT table memory at [mem 0xbddb2040-0xbddb23c9]
ACPI: Reserving SSDT table memory at [mem 0xbddb2400-0xbddb2784]
ACPI: Reserving SSDT table memory at [mem 0xbddb27c0-0xbddb3378]
ACPI: Reserving SSDT table memory at [mem 0xbddb3380-0xbddb36f6]
ACPI: Reserving SSDT table memory at [mem 0xbddb3700-0xbddb8c23]
ACPI: Reserving SSDT table memory at [mem 0xbddb8c40-0xbddbee5b]
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x10 -> Node 0
SRAT: PXM 0 -> APIC 0x11 -> Node 0
SRAT: PXM 0 -> APIC 0x12 -> Node 0
SRAT: PXM 0 -> APIC 0x13 -> Node 0
SRAT: PXM 0 -> APIC 0x14 -> Node 0
SRAT: PXM 0 -> APIC 0x15 -> Node 0
SRAT: PXM 0 -> APIC 0x16 -> Node 0
SRAT: PXM 0 -> APIC 0x17 -> Node 0
SRAT: PXM 0 -> APIC 0x18 -> Node 0
SRAT: PXM 0 -> APIC 0x19 -> Node 0
SRAT: PXM 1 -> APIC 0x20 -> Node 1
SRAT: PXM 1 -> APIC 0x21 -> Node 1
SRAT: PXM 1 -> APIC 0x22 -> Node 1
SRAT: PXM 1 -> APIC 0x23 -> Node 1
SRAT: PXM 1 -> APIC 0x24 -> Node 1
SRAT: PXM 1 -> APIC 0x25 -> Node 1
SRAT: PXM 1 -> APIC 0x26 -> Node 1
SRAT: PXM 1 -> APIC 0x27 -> Node 1
SRAT: PXM 1 -> APIC 0x28 -> Node 1
SRAT: PXM 1 -> APIC 0x29 -> Node 1
SRAT: PXM 1 -> APIC 0x30 -> Node 1
SRAT: PXM 1 -> APIC 0x31 -> Node 1
SRAT: PXM 1 -> APIC 0x32 -> Node 1
SRAT: PXM 1 -> APIC 0x33 -> Node 1
SRAT: PXM 1 -> APIC 0x34 -> Node 1
SRAT: PXM 1 -> APIC 0x35 -> Node 1
SRAT: PXM 1 -> APIC 0x36 -> Node 1
SRAT: PXM 1 -> APIC 0x37 -> Node 1
SRAT: PXM 1 -> APIC 0x38 -> Node 1
SRAT: PXM 1 -> APIC 0x39 -> Node 1
ACPI: SRAT: Node 0 PXM 0 [mem 0x00000000-0x183fffffff]
ACPI: SRAT: Node 1 PXM 1 [mem 0x1840000000-0x203fffffff]
NODE_DATA(0) allocated [mem 0x183fffb000-0x183fffffff]
NODE_DATA(1) allocated [mem 0x203fffa000-0x203fffefff]
Zone ranges:
DMA [mem 0x0000000000001000-0x0000000000ffffff]
DMA32 [mem 0x0000000001000000-0x00000000ffffffff]
Normal [mem 0x0000000100000000-0x000000203fffefff]
Device empty
Movable zone start for each node
Early memory node ranges
node 0: [mem 0x0000000000001000-0x0000000000094fff]
node 0: [mem 0x0000000000100000-0x00000000bda1afff]
node 0: [mem 0x0000000100000000-0x000000183fffffff]
node 1: [mem 0x0000001840000000-0x000000203fffefff]
Initmem setup node 0 [mem 0x0000000000001000-0x000000183fffffff]
Initmem setup node 1 [mem 0x0000001840000000-0x000000203fffefff]
On node 0, zone DMA: 1 pages in unavailable ranges
On node 0, zone DMA: 107 pages in unavailable ranges
On node 0, zone Normal: 9701 pages in unavailable ranges
On node 1, zone Normal: 1 pages in unavailable ranges
ACPI: PM-Timer IO Port: 0x908
ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1])
IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
IOAPIC[1]: apic_id 0, version 32, address 0xfec10000, GSI 24-47
IOAPIC[2]: apic_id 10, version 32, address 0xfec40000, GSI 48-71
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
ACPI: SPCR: SPCR table version 1
ACPI: SPCR: Unexpected SPCR Access Width. Defaulting to byte size
ACPI: SPCR: console: uart,mmio,0x0,9600
TSC deadline timer available
smpboot: Allowing 64 CPUs, 24 hotplug CPUs
PM: hibernation: Registered nosave memory: [mem 0x00000000-0x00000fff]
PM: hibernation: Registered nosave memory: [mem 0x00095000-0x000effff]
PM: hibernation: Registered nosave memory: [mem 0x000f0000-0x000fffff]
PM: hibernation: Registered nosave memory: [mem 0xbda1b000-0xbddabfff]
PM: hibernation: Registered nosave memory: [mem 0xbddac000-0xbddddfff]
PM: hibernation: Registered nosave memory: [mem 0xbddde000-0xcfffffff]
PM: hibernation: Registered nosave memory: [mem 0xd0000000-0xfebfffff]
PM: hibernation: Registered nosave memory: [mem 0xfec00000-0xfee0ffff]
PM: hibernation: Registered nosave memory: [mem 0xfee10000-0xff7fffff]
PM: hibernation: Registered nosave memory: [mem 0xff800000-0xffffffff]
[mem 0xd0000000-0xfebfffff] available for PCI devices
Booting paravirtualized kernel on bare hardware
clocksource: refined-jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370452778343963 ns
setup_percpu: NR_CPUS:320 nr_cpumask_bits:64 nr_cpu_ids:64 nr_node_ids:2
percpu: Embedded 63 pages/cpu s221184 r8192 d28672 u262144
pcpu-alloc: s221184 r8192 d28672 u262144 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 [0] 08 09 20 21 22 23 24 25
pcpu-alloc: [0] 26 27 28 29 40 42 44 46 [0] 48 50 52 54 56 58 60 62
pcpu-alloc: [1] 10 11 12 13 14 15 16 17 [1] 18 19 30 31 32 33 34 35
pcpu-alloc: [1] 36 37 38 39 41 43 45 47 [1] 49 51 53 55 57 59 61 63
Fallback order for Node 0: 0 1
Fallback order for Node 1: 1 0
Built 2 zonelists, mobility grouping on. Total pages: 33020337
Policy zone: Normal
Kernel command line: BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001 iomem=relaxed copytoram initrd=boot/intel_ucode.img,boot/amd_ucode.img,boot/x86_64/sysresccd.img
Unknown kernel command line parameters "copytoram BOOT_IMAGE=boot/x86_64/vmlinuz archisobasedir=sysresccd archisolabel=RESCUE1001", will be passed to user space.
random: crng init done
printk: log_buf_len individual max cpu contribution: 4096 bytes
printk: log_buf_len total cpu_extra contributions: 258048 bytes
printk: log_buf_len min size: 131072 bytes
printk: log_buf_len: 524288 bytes
printk: early log buf free: 117608(89%)
mem auto-init: stack:all(zero), heap alloc:on, heap free:off
software IO TLB: area num 64.
Memory: 131885476K/134178488K available (16391K kernel code, 2138K rwdata, 11072K rodata, 2148K init, 5356K bss, 2292752K reserved, 0K cma-reserved)
SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=64, Nodes=2
Kernel/User page tables isolation: enabled
ftrace: allocating 46437 entries in 182 pages
ftrace: allocated 182 pages with 5 groups
Dynamic Preempt: voluntary
rcu: Preemptible hierarchical RCU implementation.
rcu: RCU restricting CPUs from NR_CPUS=320 to nr_cpu_ids=64.
Trampoline variant of Tasks RCU enabled.
Rude variant of Tasks RCU enabled.
Tracing variant of Tasks RCU enabled.
rcu: RCU calculated value of scheduler-enlistment delay is 30 jiffies.
rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=64
NR_IRQS: 20736, nr_irqs: 1752, preallocated irqs: 16
rcu: srcu_init: Setting srcu_struct sizes based on contention.
kfence: initialized - using 2097152 bytes for 255 objects at 0x(____ptrval____)-0x(____ptrval____)
Console: colour VGA+ 80x25
printk: console [tty0] enabled
mempolicy: Enabling automatic NUMA balancing. Configure with numa_balancing= or the kernel.numa_balancing sysctl
ACPI: Core revision 20220331
clocksource: hpet: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 133484882848 ns
APIC: Switch to symmetric I/O mode setup
DMAR: Host address width 46
DMAR: DRHD base: 0x000000fbefe000 flags: 0x0
DMAR: dmar0: reg_base_addr fbefe000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: DRHD base: 0x000000f4ffe000 flags: 0x1
DMAR: dmar1: reg_base_addr f4ffe000 ver 1:0 cap d2078c106f0466 ecap f020de
DMAR: RMRR base: 0x000000bdffd000 end: 0x000000bdffffff
DMAR: RMRR base: 0x000000bdff6000 end: 0x000000bdffcfff
DMAR: RMRR base: 0x000000bdf83000 end: 0x000000bdf84fff
DMAR: RMRR base: 0x000000bdf7f000 end: 0x000000bdf82fff
DMAR: RMRR base: 0x000000bdf6f000 end: 0x000000bdf7efff
DMAR: RMRR base: 0x000000bdf6e000 end: 0x000000bdf6efff
DMAR: RMRR base: 0x000000000f4000 end: 0x000000000f4fff
DMAR: RMRR base: 0x000000000e8000 end: 0x000000000e8fff
DMAR: [Firmware Bug]: No firmware reserved region can cover this RMRR [0x00000000000e8000-0x00000000000e8fff], contact BIOS vendor for fixes
DMAR: [Firmware Bug]: Your BIOS is broken; bad RMRR [0x00000000000e8000-0x00000000000e8fff]
BIOS vendor: HP; Ver: P71; Product Version:
DMAR: RMRR base: 0x000000bddde000 end: 0x000000bdddefff
DMAR: ATSR flags: 0x0
DMAR-IR: IOAPIC id 10 under DRHD base 0xfbefe000 IOMMU 0
DMAR-IR: IOAPIC id 8 under DRHD base 0xf4ffe000 IOMMU 1
DMAR-IR: IOAPIC id 0 under DRHD base 0xf4ffe000 IOMMU 1
DMAR-IR: HPET id 0 under DRHD base 0xf4ffe000
DMAR-IR: x2apic is disabled because BIOS sets x2apic opt out bit.
DMAR-IR: Use 'intremap=no_x2apic_optout' to override the BIOS setting.
DMAR-IR: Enabled IRQ remapping in xapic mode
x2apic: IRQ remapping doesn't support X2APIC mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
clocksource: tsc-early: mask: 0xffffffffffffffff max_cycles: 0x2843c69159c, max_idle_ns: 440795203612 ns
Calibrating delay loop (skipped), value calculated using timer frequency.. 5588.51 BogoMIPS (lpj=9311223)
pid_max: default: 65536 minimum: 512
LSM: Security Framework initializing
landlock: Up and running.
Yama: becoming mindful.
LSM support for eBPF active
Dentry cache hash table entries: 8388608 (order: 14, 67108864 bytes, vmalloc hugepage)
Inode-cache hash table entries: 4194304 (order: 13, 33554432 bytes, vmalloc hugepage)
Mount-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
Mountpoint-cache hash table entries: 131072 (order: 8, 1048576 bytes, vmalloc)
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 512, 2MB 8, 4MB 8
Last level dTLB entries: 4KB 512, 2MB 0, 4MB 0, 1GB 4
Spectre V1 : Mitigation: usercopy/swapgs barriers and __user pointer sanitization
Spectre V2 : Mitigation: Retpolines
Spectre V2 : Spectre v2 / SpectreRSB mitigation: Filling RSB on context switch
Spectre V2 : Spectre v2 / SpectreRSB : Filling RSB on VMEXIT
Spectre V2 : Enabling Restricted Speculation for firmware calls
Spectre V2 : mitigation: Enabling conditional Indirect Branch Prediction Barrier
Spectre V2 : User space: Mitigation: STIBP via prctl
Speculative Store Bypass: Mitigation: Speculative Store Bypass disabled via prctl
MDS: Mitigation: Clear CPU buffers
MMIO Stale Data: Unknown: No mitigations
Freeing SMP alternatives memory: 40K
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2680 v2 @ 2.80GHz (family: 0x6, model: 0x3e, stepping: 0x4)
cblist_init_generic: Setting adjustable number of callback queues.
cblist_init_generic: Setting shift to 6 and lim to 1.
cblist_init_generic: Setting shift to 6 and lim to 1.
cblist_init_generic: Setting shift to 6 and lim to 1.
Performance Events: PEBS fmt1+, IvyBridge events, 16-deep LBR, full-width counters, Broken BIOS detected, complain to your hardware vendor.
[Firmware Bug]: the BIOS has corrupted hw-PMU resources (MSR 38d is 330)
Intel PMU driver.
... version: 3
... bit width: 48
... generic registers: 4
... value mask: 0000ffffffffffff
... max period: 00007fffffffffff
... fixed-purpose events: 3
... event mask: 000000070000000f
Estimated ratio of average max frequency by base frequency (times 1024): 1206
rcu: Hierarchical SRCU implementation.
rcu: Max phase no-delay instances is 1000.
NMI watchdog: Enabled. Permanently consumes one hw-PMU counter.
smp: Bringing up secondary CPUs ...
x86: Booting SMP configuration:
.... node #0, CPUs: #1 #2 #3 #4 #5 #6 #7 #8 #9
.... node #1, CPUs: #10
smpboot: CPU 10 Converting physical 0 to logical die 1
#11 #12 #13 #14 #15 #16 #17 #18 #19
.... node #0, CPUs: #20
MDS CPU bug present and SMT on, data leak possible. See for more details.
#21 #22 #23 #24 #25 #26 #27 #28 #29
.... node #1, CPUs: #30 #31 #32 #33 #34 #35 #36 #37 #38 #39
smp: Brought up 2 nodes, 40 CPUs
smpboot: Max logical packages: 4
smpboot: Total of 40 processors activated (211079.72 BogoMIPS)
devtmpfs: initialized
x86/mm: Memory block size: 2048MB
clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 6370867519511994 ns
futex hash table entries: 16384 (order: 8, 1048576 bytes, vmalloc)
pinctrl core: initialized pinctrl subsystem
PM: RTC time: 13:28:55, date: 2024-01-17
NET: Registered PF_NETLINK/PF_ROUTE protocol family
DMA: preallocated 4096 KiB GFP_KERNEL pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
DMA: preallocated 4096 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1705498135.339:1): state=initialized audit_enabled=0 res=1
thermal_sys: Registered thermal governor 'fair_share'
thermal_sys: Registered thermal governor 'bang_bang'
thermal_sys: Registered thermal governor 'step_wise'
thermal_sys: Registered thermal governor 'user_space'
thermal_sys: Registered thermal governor 'power_allocator'
cpuidle: using governor ladder
cpuidle: using governor menu
Detected 1 PCC Subspaces
Registering PCC driver as Mailbox controller
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xc0000000-0xcfffffff] (base 0xc0000000)
PCI: MMCONFIG at [mem 0xc0000000-0xcfffffff] reserved in E820
PCI: Using configuration type 1 for base access
PCI: HP ProLiant DL360 detected, enabling pci=bfsort.
core: PMU erratum BJ122, BV98, HSD29 worked around, HT is on
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages
HugeTLB: 16380 KiB vmemmap can be freed for a 1.00 GiB page
HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages
HugeTLB: 28 KiB vmemmap can be freed for a 2.00 MiB page
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: 10 ACPI AML tables successfully acquired and loaded
ACPI: Interpreter enabled
ACPI: PM: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
PCI: Using E820 reservations for host bridge windows
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-1f])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:00: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:00: root bus resource [io 0x1000-0x7fff window]
pci_bus 0000:00: root bus resource [io 0x0000-0x03af window]
pci_bus 0000:00: root bus resource [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: root bus resource [io 0x0d00-0x0fff window]
pci_bus 0000:00: root bus resource [io 0x03b0-0x03bb window]
pci_bus 0000:00: root bus resource [io 0x03c0-0x03df window]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff window]
pci_bus 0000:00: root bus resource [bus 00-1f]
pci 0000:00:00.0: [8086:0e00] type 00 class 0x060000
pci 0000:00:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.1: [8086:0e03] type 01 class 0x060400
pci 0000:00:01.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
pci 0000:00:02.1: [8086:0e05] type 01 class 0x060400
pci 0000:00:02.1: PME# supported from D0 D3hot D3cold
pci 0000:00:02.2: [8086:0e06] type 01 class 0x060400
pci 0000:00:02.2: PME# supported from D0 D3hot D3cold
pci 0000:00:02.3: [8086:0e07] type 01 class 0x060400
pci 0000:00:02.3: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:00:03.0: enabling Extended Tags
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.1: [8086:0e09] type 01 class 0x060400
pci 0000:00:03.1: PME# supported from D0 D3hot D3cold
pci 0000:00:03.2: [8086:0e0a] type 01 class 0x060400
pci 0000:00:03.2: PME# supported from D0 D3hot D3cold
pci 0000:00:03.3: [8086:0e0b] type 01 class 0x060400
pci 0000:00:03.3: PME# supported from D0 D3hot D3cold
pci 0000:00:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [mem 0xf6cf0000-0xf6cf3fff 64bit]
pci 0000:00:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:00:04.1: reg 0x10: [mem 0xf6ce0000-0xf6ce3fff 64bit]
pci 0000:00:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:00:04.2: reg 0x10: [mem 0xf6cd0000-0xf6cd3fff 64bit]
pci 0000:00:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:00:04.3: reg 0x10: [mem 0xf6cc0000-0xf6cc3fff 64bit]
pci 0000:00:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:00:04.4: reg 0x10: [mem 0xf6cb0000-0xf6cb3fff 64bit]
pci 0000:00:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:00:04.5: reg 0x10: [mem 0xf6ca0000-0xf6ca3fff 64bit]
pci 0000:00:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:00:04.6: reg 0x10: [mem 0xf6c90000-0xf6c93fff 64bit]
pci 0000:00:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:00:04.7: reg 0x10: [mem 0xf6c80000-0xf6c83fff 64bit]
pci 0000:00:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:00:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xf6c70000-0xf6c70fff]
pci 0000:00:11.0: [8086:1d3e] type 01 class 0x060400
pci 0000:00:11.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:1d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xf6c60000-0xf6c603ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: [8086:1d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: [8086:1d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: [8086:1d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xf6c50000-0xf6c503ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1e.0: [8086:244e] type 01 class 0x060401
pci 0000:00:1f.0: [8086:1d41] type 00 class 0x060100
pci 0000:00:1f.2: [8086:1d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io 0x4000-0x4007]
pci 0000:00:1f.2: reg 0x14: [io 0x4008-0x400b]
pci 0000:00:1f.2: reg 0x18: [io 0x4010-0x4017]
pci 0000:00:1f.2: reg 0x1c: [io 0x4018-0x401b]
pci 0000:00:1f.2: reg 0x20: [io 0x4020-0x403f]
pci 0000:00:1f.2: reg 0x24: [mem 0xf6c40000-0xf6c407ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.1: PCI bridge to [bus 11]
pci 0000:03:00.0: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xf6bf0000-0xf6bfffff 64bit pref]
pci 0000:03:00.0: reg 0x18: [mem 0xf6be0000-0xf6beffff 64bit pref]
pci 0000:03:00.0: reg 0x20: [mem 0xf6bd0000-0xf6bdffff 64bit pref]
pci 0000:03:00.0: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.1: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.1: reg 0x10: [mem 0xf6bc0000-0xf6bcffff 64bit pref]
pci 0000:03:00.1: reg 0x18: [mem 0xf6bb0000-0xf6bbffff 64bit pref]
pci 0000:03:00.1: reg 0x20: [mem 0xf6ba0000-0xf6baffff 64bit pref]
pci 0000:03:00.1: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.1: PME# supported from D0 D3hot D3cold
pci 0000:03:00.2: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.2: reg 0x10: [mem 0xf6b90000-0xf6b9ffff 64bit pref]
pci 0000:03:00.2: reg 0x18: [mem 0xf6b80000-0xf6b8ffff 64bit pref]
pci 0000:03:00.2: reg 0x20: [mem 0xf6b70000-0xf6b7ffff 64bit pref]
pci 0000:03:00.2: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.2: PME# supported from D0 D3hot D3cold
pci 0000:03:00.3: [14e4:1657] type 00 class 0x020000
pci 0000:03:00.3: reg 0x10: [mem 0xf6b60000-0xf6b6ffff 64bit pref]
pci 0000:03:00.3: reg 0x18: [mem 0xf6b50000-0xf6b5ffff 64bit pref]
pci 0000:03:00.3: reg 0x20: [mem 0xf6b40000-0xf6b4ffff 64bit pref]
pci 0000:03:00.3: reg 0x30: [mem 0x00000000-0x0003ffff pref]
pci 0000:03:00.3: PME# supported from D0 D3hot D3cold
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 12]
pci 0000:02:00.0: [103c:323b] type 00 class 0x010400
pci 0000:02:00.0: reg 0x10: [mem 0xf7e00000-0xf7efffff 64bit]
pci 0000:02:00.0: reg 0x18: [mem 0xf7df0000-0xf7df03ff 64bit]
pci 0000:02:00.0: reg 0x20: [io 0x5000-0x50ff]
pci 0000:02:00.0: reg 0x30: [mem 0x00000000-0x0007ffff pref]
pci 0000:02:00.0: enabling Extended Tags
pci 0000:02:00.0: PME# supported from D0 D1 D3hot
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf7d00000-0xf7efffff]
pci 0000:00:02.3: PCI bridge to [bus 13]
pci 0000:07:00.0: [1912:0015] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xf7ff0000-0xf7ff1fff 64bit]
pci 0000:07:00.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:03.1: PCI bridge to [bus 14]
pci 0000:00:03.2: PCI bridge to [bus 15]
pci 0000:00:03.3: PCI bridge to [bus 16]
pci 0000:00:11.0: PCI bridge to [bus 18]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:01:00.0: [103c:3306] type 00 class 0x088000
pci 0000:01:00.0: reg 0x10: [io 0x3000-0x30ff]
pci 0000:01:00.0: reg 0x14: [mem 0xf7cf0000-0xf7cf01ff]
pci 0000:01:00.0: reg 0x18: [io 0x3400-0x34ff]
pci 0000:01:00.1: [102b:0533] type 00 class 0x030000
pci 0000:01:00.1: reg 0x10: [mem 0xf5000000-0xf5ffffff pref]
pci 0000:01:00.1: reg 0x14: [mem 0xf7ce0000-0xf7ce3fff]
pci 0000:01:00.1: reg 0x18: [mem 0xf7000000-0xf77fffff]
pci 0000:01:00.1: Video device with shadowed ROM at [mem 0x000c0000-0x000dffff]
pci 0000:01:00.2: [103c:3307] type 00 class 0x088000
pci 0000:01:00.2: reg 0x10: [io 0x3800-0x38ff]
pci 0000:01:00.2: reg 0x14: [mem 0xf6ff0000-0xf6ff00ff]
pci 0000:01:00.2: reg 0x18: [mem 0xf6e00000-0xf6efffff]
pci 0000:01:00.2: reg 0x1c: [mem 0xf6d80000-0xf6dfffff]
pci 0000:01:00.2: reg 0x20: [mem 0xf6d70000-0xf6d77fff]
pci 0000:01:00.2: reg 0x24: [mem 0xf6d60000-0xf6d67fff]
pci 0000:01:00.2: reg 0x30: [mem 0x00000000-0x0000ffff pref]
pci 0000:01:00.2: PME# supported from D0 D3hot D3cold
pci 0000:01:00.4: [103c:3300] type 00 class 0x0c0300
pci 0000:01:00.4: reg 0x20: [io 0x3c00-0x3c1f]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7cfffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci_bus 0000:17: extended config space not accessible
pci 0000:00:1e.0: PCI bridge to [bus 17] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0xf4000000-0xf7ffffff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x1000-0x7fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0000-0x03af window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03e0-0x0cf7 window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x0d00-0x0fff window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03b0-0x03bb window] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0x03c0-0x03df window] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff window] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI: Interrupt link LNKA configured for IRQ 5
ACPI: PCI: Interrupt link LNKB configured for IRQ 7
ACPI: PCI: Interrupt link LNKC configured for IRQ 10
ACPI: PCI: Interrupt link LNKD configured for IRQ 10
ACPI: PCI: Interrupt link LNKE configured for IRQ 5
ACPI: PCI: Interrupt link LNKF configured for IRQ 7
ACPI: PCI: Interrupt link LNKG configured for IRQ 0
ACPI: PCI: Interrupt link LNKG disabled
ACPI: PCI: Interrupt link LNKH configured for IRQ 0
ACPI: PCI: Interrupt link LNKH disabled
ACPI: PCI Root Bridge [PCI1] (domain 0000 [bus 20-3f])
acpi PNP0A08:01: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI EDR HPX-Type3]
acpi PNP0A08:01: _OSC: platform does not support [PCIeHotplug SHPCHotplug PME AER PCIeCapability LTR DPC]
acpi PNP0A08:01: FADT indicates ASPM is unsupported, using BIOS configuration
PCI host bridge to bus 0000:20
pci_bus 0000:20: root bus resource [mem 0xfb000000-0xfbffffff window]
pci_bus 0000:20: root bus resource [io 0x8000-0xffff window]
pci_bus 0000:20: root bus resource [bus 20-3f]
pci 0000:20:00.0: [8086:0e01] type 01 class 0x060400
pci 0000:20:00.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.0: [8086:0e02] type 01 class 0x060400
pci 0000:20:01.0: PME# supported from D0 D3hot D3cold
pci 0000:20:01.1: [8086:0e03] type 01 class 0x060400
pci 0000:20:01.1: PME# supported from D0 D3hot D3cold
pci 0000:20:02.0: [8086:0e04] type 01 class 0x060400
pci 0000:20:02.0: PME# supported from D0 D3hot D3cold
pci 0000:20:02.1: [8086:0e05] type 01 class 0x060400
pci 0000:20:02.1: PME# supported from D0 D3hot D3cold
pci 0000:20:02.2: [8086:0e06] type 01 class 0x060400
pci 0000:20:02.2: PME# supported from D0 D3hot D3cold
pci 0000:20:02.3: [8086:0e07] type 01 class 0x060400
pci 0000:20:02.3: PME# supported from D0 D3hot D3cold
pci 0000:20:03.0: [8086:0e08] type 01 class 0x060400
pci 0000:20:03.0: enabling Extended Tags
pci 0000:20:03.0: PME# supported from D0 D3hot D3cold
pci 0000:20:03.1: [8086:0e09] type 01 class 0x060400
pci 0000:20:03.1: PME# supported from D0 D3hot D3cold
pci 0000:20:03.2: [8086:0e0a] type 01 class 0x060400
pci 0000:20:03.2: PME# supported from D0 D3hot D3cold
pci 0000:20:03.3: [8086:0e0b] type 01 class 0x060400
pci 0000:20:03.3: PME# supported from D0 D3hot D3cold
pci 0000:20:04.0: [8086:0e20] type 00 class 0x088000
pci 0000:20:04.0: reg 0x10: [mem 0xfbff0000-0xfbff3fff 64bit]
pci 0000:20:04.1: [8086:0e21] type 00 class 0x088000
pci 0000:20:04.1: reg 0x10: [mem 0xfbfe0000-0xfbfe3fff 64bit]
pci 0000:20:04.2: [8086:0e22] type 00 class 0x088000
pci 0000:20:04.2: reg 0x10: [mem 0xfbfd0000-0xfbfd3fff 64bit]
pci 0000:20:04.3: [8086:0e23] type 00 class 0x088000
pci 0000:20:04.3: reg 0x10: [mem 0xfbfc0000-0xfbfc3fff 64bit]
pci 0000:20:04.4: [8086:0e24] type 00 class 0x088000
pci 0000:20:04.4: reg 0x10: [mem 0xfbfb0000-0xfbfb3fff 64bit]
pci 0000:20:04.5: [8086:0e25] type 00 class 0x088000
pci 0000:20:04.5: reg 0x10: [mem 0xfbfa0000-0xfbfa3fff 64bit]
pci 0000:20:04.6: [8086:0e26] type 00 class 0x088000
pci 0000:20:04.6: reg 0x10: [mem 0xfbf90000-0xfbf93fff 64bit]
pci 0000:20:04.7: [8086:0e27] type 00 class 0x088000
pci 0000:20:04.7: reg 0x10: [mem 0xfbf80000-0xfbf83fff 64bit]
pci 0000:20:05.0: [8086:0e28] type 00 class 0x088000
pci 0000:20:05.2: [8086:0e2a] type 00 class 0x088000
pci 0000:20:05.4: [8086:0e2c] type 00 class 0x080020
pci 0000:20:05.4: reg 0x10: [mem 0xfbf70000-0xfbf70fff]
pci 0000:20:00.0: PCI bridge to [bus 2b]
pci 0000:20:01.0: PCI bridge to [bus 21]
pci 0000:20:01.1: PCI bridge to [bus 22]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:02.1: PCI bridge to [bus 24]
pci 0000:20:02.2: PCI bridge to [bus 25]
pci 0000:20:02.3: PCI bridge to [bus 26]
pci 0000:20:03.0: PCI bridge to [bus 27]
pci 0000:20:03.1: PCI bridge to [bus 28]
pci 0000:20:03.2: PCI bridge to [bus 29]
pci 0000:20:03.3: PCI bridge to [bus 2a]
pci_bus 0000:20: on NUMA node 1
iommu: Default domain type: Translated
iommu: DMA domain TLB invalidation policy: lazy mode
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti
PTP clock support registered
EDAC MC: Ver: 3.0.0
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO
NetLabel: unlabeled traffic allowed by default
mctp: management component transport protocol core
NET: Registered PF_MCTP protocol family
PCI: Using ACPI for IRQ routing
PCI: Discovered peer bus 1f
PCI: root bus 1f: using default resources
PCI: Probing PCI hardware (bus 1f)
PCI host bridge to bus 0000:1f
pci_bus 0000:1f: Unknown NUMA node; performance will be reduced
pci_bus 0000:1f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:1f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:1f: No busn resource found for root bus, will use [bus 1f-ff]
pci_bus 0000:1f: busn_res: can not insert [bus 1f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
pci 0000:1f:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:1f:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:1f:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:1f:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:1f:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:1f:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:1f:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:1f:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:1f:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:1f:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:1f:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:1f:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:1f:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:1f:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:1f:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:1f:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:1f:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:1f:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:1f:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:1f:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:1f:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:1f:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:1f:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:1f:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:1f:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:1f:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:1f:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:1f:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:1f:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:1f:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:1f:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:1f:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:1f:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:1f:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:1f:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:1f:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:1f:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:1f:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:1f:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:1f:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:1f:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:1f: busn_res: [bus 1f-ff] end is updated to 1f
pci_bus 0000:1f: busn_res: can not insert [bus 1f] under domain [bus 00-ff] (conflicts with (null) [bus 00-1f])
PCI: Discovered peer bus 3f
PCI: root bus 3f: using default resources
PCI: Probing PCI hardware (bus 3f)
PCI host bridge to bus 0000:3f
pci_bus 0000:3f: Unknown NUMA node; performance will be reduced
pci_bus 0000:3f: root bus resource [io 0x0000-0xffff]
pci_bus 0000:3f: root bus resource [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: No busn resource found for root bus, will use [bus 3f-ff]
pci_bus 0000:3f: busn_res: can not insert [bus 3f-ff] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
pci 0000:3f:08.0: [8086:0e80] type 00 class 0x088000
pci 0000:3f:09.0: [8086:0e90] type 00 class 0x088000
pci 0000:3f:0a.0: [8086:0ec0] type 00 class 0x088000
pci 0000:3f:0a.1: [8086:0ec1] type 00 class 0x088000
pci 0000:3f:0a.2: [8086:0ec2] type 00 class 0x088000
pci 0000:3f:0a.3: [8086:0ec3] type 00 class 0x088000
pci 0000:3f:0b.0: [8086:0e1e] type 00 class 0x088000
pci 0000:3f:0b.3: [8086:0e1f] type 00 class 0x088000
pci 0000:3f:0c.0: [8086:0ee0] type 00 class 0x088000
pci 0000:3f:0c.1: [8086:0ee2] type 00 class 0x088000
pci 0000:3f:0c.2: [8086:0ee4] type 00 class 0x088000
pci 0000:3f:0c.3: [8086:0ee6] type 00 class 0x088000
pci 0000:3f:0c.4: [8086:0ee8] type 00 class 0x088000
pci 0000:3f:0d.0: [8086:0ee1] type 00 class 0x088000
pci 0000:3f:0d.1: [8086:0ee3] type 00 class 0x088000
pci 0000:3f:0d.2: [8086:0ee5] type 00 class 0x088000
pci 0000:3f:0d.3: [8086:0ee7] type 00 class 0x088000
pci 0000:3f:0d.4: [8086:0ee9] type 00 class 0x088000
pci 0000:3f:0e.0: [8086:0ea0] type 00 class 0x088000
pci 0000:3f:0e.1: [8086:0e30] type 00 class 0x110100
pci 0000:3f:0f.0: [8086:0ea8] type 00 class 0x088000
pci 0000:3f:0f.1: [8086:0e71] type 00 class 0x088000
pci 0000:3f:0f.2: [8086:0eaa] type 00 class 0x088000
pci 0000:3f:0f.3: [8086:0eab] type 00 class 0x088000
pci 0000:3f:0f.4: [8086:0eac] type 00 class 0x088000
pci 0000:3f:0f.5: [8086:0ead] type 00 class 0x088000
pci 0000:3f:10.0: [8086:0eb0] type 00 class 0x088000
pci 0000:3f:10.1: [8086:0eb1] type 00 class 0x088000
pci 0000:3f:10.2: [8086:0eb2] type 00 class 0x088000
pci 0000:3f:10.3: [8086:0eb3] type 00 class 0x088000
pci 0000:3f:10.4: [8086:0eb4] type 00 class 0x088000
pci 0000:3f:10.5: [8086:0eb5] type 00 class 0x088000
pci 0000:3f:10.6: [8086:0eb6] type 00 class 0x088000
pci 0000:3f:10.7: [8086:0eb7] type 00 class 0x088000
pci 0000:3f:13.0: [8086:0e1d] type 00 class 0x088000
pci 0000:3f:13.1: [8086:0e34] type 00 class 0x110100
pci 0000:3f:13.4: [8086:0e81] type 00 class 0x088000
pci 0000:3f:13.5: [8086:0e36] type 00 class 0x110100
pci 0000:3f:16.0: [8086:0ec8] type 00 class 0x088000
pci 0000:3f:16.1: [8086:0ec9] type 00 class 0x088000
pci 0000:3f:16.2: [8086:0eca] type 00 class 0x088000
pci_bus 0000:3f: busn_res: [bus 3f-ff] end is updated to 3f
pci_bus 0000:3f: busn_res: can not insert [bus 3f] under domain [bus 00-ff] (conflicts with (null) [bus 20-3f])
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x00095400-0x0009ffff]
e820: reserve RAM buffer [mem 0xbda1b000-0xbfffffff]
e820: reserve RAM buffer [mem 0x203ffff000-0x203fffffff]
pci 0000:01:00.1: vgaarb: setting as boot VGA device
pci 0000:01:00.1: vgaarb: bridge control possible
pci 0000:01:00.1: vgaarb: VGA device added: decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
clocksource: Switched to clocksource tsc-early
VFS: Disk quotas dquot_6.6.0
VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
pnp: PnP ACPI init
system 00:00: [mem 0xf4ffe000-0xf4ffffff] could not be reserved
system 00:01: [io 0x0408-0x040f] has been reserved
system 00:01: [io 0x04d0-0x04d1] has been reserved
system 00:01: [io 0x0310-0x0315] has been reserved
system 00:01: [io 0x0316-0x0317] has been reserved
system 00:01: [io 0x0700-0x071f] has been reserved
system 00:01: [io 0x0880-0x08ff] has been reserved
system 00:01: [io 0x0900-0x097f] has been reserved
system 00:01: [io 0x0cd4-0x0cd7] has been reserved
system 00:01: [io 0x0cd0-0x0cd3] has been reserved
system 00:01: [io 0x0f50-0x0f58] has been reserved
system 00:01: [io 0x0ca0-0x0ca1] has been reserved
system 00:01: [io 0x0ca4-0x0ca5] has been reserved
system 00:01: [io 0x02f8-0x02ff] has been reserved
system 00:01: [mem 0xc0000000-0xcfffffff] has been reserved
system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved
system 00:01: [mem 0xfc000000-0xfc000fff] has been reserved
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed30000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfee00000-0xfee00fff] has been reserved
system 00:01: [mem 0xff800000-0xffffffff] has been reserved
system 00:06: [mem 0xfbefe000-0xfbefffff] could not be reserved
pnp: PnP ACPI: found 7 devices
clocksource: acpi_pm: mask: 0xffffff max_cycles: 0xffffff, max_idle_ns: 2085701024 ns
NET: Registered PF_INET protocol family
IP idents hash table entries: 262144 (order: 9, 2097152 bytes, vmalloc)
tcp_listen_portaddr_hash hash table entries: 65536 (order: 8, 1048576 bytes, vmalloc)
Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, vmalloc)
TCP established hash table entries: 524288 (order: 10, 4194304 bytes, vmalloc hugepage)
TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
TCP: Hash tables configured (established 524288 bind 65536)
MPTCP token hash table entries: 65536 (order: 8, 1572864 bytes, vmalloc)
UDP hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
UDP-Lite hash table entries: 65536 (order: 9, 2097152 bytes, vmalloc)
NET: Registered PF_UNIX/PF_LOCAL protocol family
NET: Registered PF_XDP protocol family
pci 0000:00:02.0: BAR 14: assigned [mem 0xf4000000-0xf40fffff]
pci 0000:00:01.0: PCI bridge to [bus 04]
pci 0000:00:01.1: PCI bridge to [bus 11]
pci 0000:03:00.0: BAR 6: assigned [mem 0xf4000000-0xf403ffff pref]
pci 0000:03:00.1: BAR 6: assigned [mem 0xf4040000-0xf407ffff pref]
pci 0000:03:00.2: BAR 6: assigned [mem 0xf4080000-0xf40bffff pref]
pci 0000:03:00.3: BAR 6: assigned [mem 0xf40c0000-0xf40fffff pref]
pci 0000:00:02.0: PCI bridge to [bus 03]
pci 0000:00:02.0: bridge window [mem 0xf4000000-0xf40fffff]
pci 0000:00:02.0: bridge window [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci 0000:00:02.1: PCI bridge to [bus 12]
pci 0000:02:00.0: BAR 6: assigned [mem 0xf7d00000-0xf7d7ffff pref]
pci 0000:00:02.2: PCI bridge to [bus 02]
pci 0000:00:02.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:02.2: bridge window [mem 0xf7d00000-0xf7efffff]
pci 0000:00:02.3: PCI bridge to [bus 13]
pci 0000:00:03.0: PCI bridge to [bus 07]
pci 0000:00:03.0: bridge window [mem 0xf7f00000-0xf7ffffff]
pci 0000:00:03.1: PCI bridge to [bus 14]
pci 0000:00:03.2: PCI bridge to [bus 15]
pci 0000:00:03.3: PCI bridge to [bus 16]
pci 0000:00:11.0: PCI bridge to [bus 18]
pci 0000:00:1c.0: PCI bridge to [bus 0a]
pci 0000:01:00.2: BAR 6: assigned [mem 0xf6d00000-0xf6d0ffff pref]
pci 0000:00:1c.7: PCI bridge to [bus 01]
pci 0000:00:1c.7: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.7: bridge window [mem 0xf6d00000-0xf7cfffff]
pci 0000:00:1c.7: bridge window [mem 0xf5000000-0xf5ffffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 17]
pci_bus 0000:00: resource 4 [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:00: resource 5 [io 0x1000-0x7fff window]
pci_bus 0000:00: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:00: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:00: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:00: resource 9 [io 0x03b0-0x03bb window]
pci_bus 0000:00: resource 10 [io 0x03c0-0x03df window]
pci_bus 0000:00: resource 11 [mem 0x000a0000-0x000bffff window]
pci_bus 0000:03: resource 1 [mem 0xf4000000-0xf40fffff]
pci_bus 0000:03: resource 2 [mem 0xf6b00000-0xf6bfffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:02: resource 1 [mem 0xf7d00000-0xf7efffff]
pci_bus 0000:07: resource 1 [mem 0xf7f00000-0xf7ffffff]
pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:01: resource 1 [mem 0xf6d00000-0xf7cfffff]
pci_bus 0000:01: resource 2 [mem 0xf5000000-0xf5ffffff 64bit pref]
pci_bus 0000:17: resource 4 [mem 0xf4000000-0xf7ffffff window]
pci_bus 0000:17: resource 5 [io 0x1000-0x7fff window]
pci_bus 0000:17: resource 6 [io 0x0000-0x03af window]
pci_bus 0000:17: resource 7 [io 0x03e0-0x0cf7 window]
pci_bus 0000:17: resource 8 [io 0x0d00-0x0fff window]
pci_bus 0000:17: resource 9 [io 0x03b0-0x03bb window]
pci_bus 0000:17: resource 10 [io 0x03c0-0x03df window]
pci_bus 0000:17: resource 11 [mem 0x000a0000-0x000bffff window]
pci 0000:20:00.0: PCI bridge to [bus 2b]
pci 0000:20:01.0: PCI bridge to [bus 21]
pci 0000:20:01.1: PCI bridge to [bus 22]
pci 0000:20:02.0: PCI bridge to [bus 23]
pci 0000:20:02.1: PCI bridge to [bus 24]
pci 0000:20:02.2: PCI bridge to [bus 25]
pci 0000:20:02.3: PCI bridge to [bus 26]
pci 0000:20:03.0: PCI bridge to [bus 27]
pci 0000:20:03.1: PCI bridge to [bus 28]
pci 0000:20:03.2: PCI bridge to [bus 29]
pci 0000:20:03.3: PCI bridge to [bus 2a]
pci_bus 0000:20: resource 4 [mem 0xfb000000-0xfbffffff window]
pci_bus 0000:20: resource 5 [io 0x8000-0xffff window]
pci_bus 0000:1f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:1f: resource 5 [mem 0x00000000-0x3fffffffffff]
pci_bus 0000:3f: resource 4 [io 0x0000-0xffff]
pci_bus 0000:3f: resource 5 [mem 0x00000000-0x3fffffffffff]
pci 0000:00:05.0: disabled boot interrupts on device [8086:0e28]
pci 0000:00:1a.0: quirk_usb_early_handoff+0x0/0x750 took 17567 usecs
pci 0000:00:1d.0: quirk_usb_early_handoff+0x0/0x750 took 19484 usecs
pci 0000:20:05.0: disabled boot interrupts on device [8086:0e28]
PCI: CLS 64 bytes, default 64
Trying to unpack rootfs image as initramfs...
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB: mapped [mem 0x00000000b9a1b000-0x00000000bda1b000] (64MB)
Initialise system trusted keyrings
Key type blacklist registered
workingset: timestamp_bits=41 max_order=25 bucket_order=0
zbud: loaded
integrity: Platform Keyring initialized
integrity: Machine keyring initialized
Key type asymmetric registered
Asymmetric key parser 'x509' registered
Freeing initrd memory: 62916K
alg: self-tests for CTR-KDF (hmac(sha256)) passed
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 242)
io scheduler mq-deadline registered
io scheduler kyber registered
io scheduler bfq registered
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
ACPI: \_PR_.CP00: Found 2 idle states
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: button: Power Button [PWRF]
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: thermal: Thermal Zone [THM0] (8 C)
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
00:02: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
serial8250: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
AMD-Vi: AMD IOMMUv2 functionality not available on this system - This is not a bug.
ACPI: bus type drm_connector registered
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck stag pm led clo pmp pio slum part ems apst
scsi host0: ahci
scsi host1: ahci
scsi host2: ahci
scsi host3: ahci
scsi host4: ahci
scsi host5: ahci
ata1: SATA max UDMA/133 abar m2048@0xf6c40000 port 0xf6c40100 irq 47
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
ehci-pci 0000:00:1a.0: EHCI Host Controller
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: irq 21, io mem 0xf6c60000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: EHCI Host Controller
usb usb1: Manufacturer: Linux 6.1.30-1-lts ehci_hcd
usb usb1: SerialNumber: 0000:00:1a.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: irq 20, io mem 0xf6c50000
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: EHCI Host Controller
usb usb2: Manufacturer: Linux 6.1.30-1-lts ehci_hcd
usb usb2: SerialNumber: 0000:00:1d.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
uhci_hcd 0000:01:00.4: UHCI Host Controller
uhci_hcd 0000:01:00.4: new USB bus registered, assigned bus number 3
uhci_hcd 0000:01:00.4: detected 8 ports
uhci_hcd 0000:01:00.4: port count misdetected? forcing to 2 ports
uhci_hcd 0000:01:00.4: irq 48, io port 0x00003c00
usb usb3: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: UHCI Host Controller
usb usb3: Manufacturer: Linux 6.1.30-1-lts uhci_hcd
usb usb3: SerialNumber: 0000:01:00.4
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new interface driver usbserial_generic
rtc_cmos 00:03: RTC can wake from S4
rtc_cmos 00:03: registered as rtc0
rtc_cmos 00:03: setting system clock to 2024-01-17T13:28:55 UTC (1705498135)
rtc_cmos 00:03: alarms up to one day, 114 bytes nvram
intel_pstate: Intel P-state driver initializing
ledtrig-cpu: registered to indicate activity on CPUs
hid: raw HID events driver (C) Jiri Kosina
drop_monitor: Initializing network drop monitor service
Initializing XFRM netlink socket
NET: Registered PF_INET6 protocol family
Segment Routing with IPv6
RPL Segment Routing with IPv6
In-situ OAM (IOAM) with IPv6
NET: Registered PF_PACKET protocol family
microcode: sig=0x306e4, pf=0x1, revision=0x42e
microcode: Microcode Update Driver: v2.2.
IPI shorthand broadcast: enabled
sched_clock: Marking stable (1511427430, 6118827)->(1559719686, -42173429)
registered taskstats version 1
Loading compiled-in X.509 certificates
Loaded X.509 cert 'Build time autogenerated kernel key: 0cd463d174e2070d2d51ef62220aed00ebc7ff7f'
zswap: loaded using pool lz4/z3fold
Key type .fscrypt registered
Key type fscrypt-provisioning registered
pstore: Using crash dump compression: zstd
PM: Magic number: 8:550:483
RAS: Correctable Errors collector initialized.
usb 1-1: new high-speed USB device number 2 using ehci-pci
usb 2-1: new high-speed USB device number 2 using ehci-pci
ata1: SATA link down (SStatus 0 SControl 300)
Freeing unused decrypted memory: 2036K
Freeing unused kernel image (initmem) memory: 2148K
Write protecting the kernel read-only data: 30720k
Freeing unused kernel image (text/rodata gap) memory: 2040K
Freeing unused kernel image (rodata/data gap) memory: 1216K
x86/mm: Checked W+X mappings: passed, no W+X pages found.
rodata_test: all tests were successful
x86/mm: Checking user space page tables
usb 1-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 1-1:1.0: USB hub found
hub 1-1:1.0: 6 ports detected
usb 2-1: New USB device found, idVendor=8087, idProduct=0024, bcdDevice= 0.00
usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 8 ports detected
x86/mm: Checked W+X mappings: passed, no W+X pages found.
Run /init as init process
with arguments:
/init
copytoram
with environment:
HOME=/
TERM=linux
BOOT_IMAGE=boot/x86_64/vmlinuz
archisobasedir=sysresccd
archisolabel=RESCUE1001
usb 1-1.3: new high-speed USB device number 3 using ehci-pci
usb 2-1.3: new high-speed USB device number 3 using ehci-pci
usb 1-1.3: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00
usb 1-1.3: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1.3: Product: SanDisk 3.2Gen1
usb 1-1.3: Manufacturer: USB
usb 1-1.3: SerialNumber: 0101c2e7e2bd14c72e152b41e1118cee6bc6a150a15488581d529fc9438b4598acee000000000000000000002057697200164600955581076eaed724
usb 2-1.3: New USB device found, idVendor=0424, idProduct=2660, bcdDevice= 8.01
usb 2-1.3: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 2-1.3:1.0: USB hub found
hub 2-1.3:1.0: 2 ports detected
tsc: Refined TSC clocksource calibration: 2793.269 MHz
clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x284369f366d, max_idle_ns: 440795234812 ns
clocksource: Switched to clocksource tsc
usb 1-1.6: new full-speed USB device number 4 using ehci-pci
usb 1-1.6: New USB device found, idVendor=046d, idProduct=c52b, bcdDevice=24.11
usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=0
usb 1-1.6: Product: USB Receiver
usb 1-1.6: Manufacturer: Logitech
fuse: init (API version 7.37)
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f0e:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
usb-storage 1-1.3:1.0: USB Mass Storage device detected
scsi host6: usb-storage 1-1.3:1.0
usbcore: registered new interface driver usb-storage
HP HPSA Driver (v 3.4.20-200)
hpsa 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/0003:046D:C52B.0001/input/input1
hpsa 0000:02:00.0: Logical aborts not supported
hpsa 0000:02:00.0: HP SSD Smart Path aborts not supported
xhci_hcd 0000:07:00.0: failed to load firmware renesas_usb_fw.mem, fallback to ROM
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
usbcore: registered new interface driver uas
xhci_hcd 0000:07:00.0: hcc params 0x014051cf hci version 0x100 quirks 0x0000001100000090
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 5
xhci_hcd 0000:07:00.0: Host supports USB 3.0 SuperSpeed
cryptd: max_cpu_qlen set to 1000
usb usb4: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 6.1.30-1-lts xhci-hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
usb usb5: We don't know the algorithms for LPM for this host, disabling LPM.
usb usb5: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: xHCI Host Controller
usb usb5: Manufacturer: Linux 6.1.30-1-lts xhci-hcd
usb usb5: SerialNumber: 0000:07:00.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
AVX version of gcm_enc/dec engaged.
AES CTR mode by8 optimization enabled
hid-generic 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input0
input: Logitech USB Receiver Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0002/input/input2
input: Logitech USB Receiver Consumer Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0002/input/input3
tg3 0000:03:00.0 eth0: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:37:b4
tg3 0000:03:00.0 eth0: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.0 eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.0 eth0: dma_rwctrl[00000001] dma_mask[64-bit]
scsi host7: hpsa
hpsa can't handle SMP requests
hpsa 0000:02:00.0: scsi 7:0:0:0: added RAID HP P420i controller SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 7:0:1:0: added Direct-Access ATA TEAM T253512GB PHYS DRV SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 7:0:2:0: added Direct-Access ATA TEAM T253480GB PHYS DRV SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 7:0:3:0: added Direct-Access ATA TEAM T253512GB PHYS DRV SSDSmartPathCap- En- Exp=1
hpsa 0000:02:00.0: scsi 7:0:4:0: masked Enclosure PMCSIERA SRCv8x6G enclosure SSDSmartPathCap- En- Exp=0
hpsa can't handle SMP requests
scsi 7:0:0:0: RAID HP P420i 8.00 PQ: 0 ANSI: 5
hpsa can't handle SMP requests
scsi 7:0:1:0: Direct-Access ATA TEAM T253512GB 0A0 PQ: 0 ANSI: 6
tg3 0000:03:00.1 eth1: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:37:b5
tg3 0000:03:00.1 eth1: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.1 eth1: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.1 eth1: dma_rwctrl[00000001] dma_mask[64-bit]
hpsa can't handle SMP requests
scsi 7:0:2:0: Direct-Access ATA TEAM T253480GB 7A0 PQ: 0 ANSI: 6
input: Logitech USB Receiver System Control as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/0003:046D:C52B.0002/input/input4
hid-generic 0003:046D:C52B.0002: input,hiddev96,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input1
hid-generic 0003:046D:C52B.0003: hiddev97,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input2
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
tg3 0000:03:00.2 eth2: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:37:b6
tg3 0000:03:00.2 eth2: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.2 eth2: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.2 eth2: dma_rwctrl[00000001] dma_mask[64-bit]
hpsa can't handle SMP requests
scsi 7:0:3:0: Direct-Access ATA TEAM T253512GB 0A0 PQ: 0 ANSI: 6
tg3 0000:03:00.3 eth3: Tigon3 [partno(629133-002) rev 5719001] (PCI Express) MAC address d8:9d:67:2c:37:b7
tg3 0000:03:00.3 eth3: attached PHY is 5719C (10/100/1000Base-T Ethernet) (WireSpeed[1], EEE[1])
tg3 0000:03:00.3 eth3: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[1] TSOcap[1]
tg3 0000:03:00.3 eth3: dma_rwctrl[00000001] dma_mask[64-bit]
sd 7:0:1:0: [sda] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 7:0:2:0: [sdb] 937703088 512-byte logical blocks: (480 GB/447 GiB)
sd 7:0:3:0: [sdc] 1000215216 512-byte logical blocks: (512 GB/477 GiB)
sd 7:0:2:0: [sdb] Write Protect is off
sd 7:0:2:0: [sdb] Mode Sense: 46 00 10 08
sd 7:0:1:0: [sda] Write Protect is off
sd 7:0:1:0: [sda] Mode Sense: 46 00 10 08
sd 7:0:3:0: [sdc] Write Protect is off
sd 7:0:3:0: [sdc] Mode Sense: 46 00 10 08
sd 7:0:2:0: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 7:0:1:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 7:0:3:0: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
sd 7:0:2:0: [sdb] Attached SCSI disk
sd 7:0:3:0: [sdc] Attached SCSI disk
sd 7:0:1:0: [sda] Attached SCSI disk
logitech-djreceiver 0003:046D:C52B.0003: hiddev96,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1a.0-1.6/input2
input: Logitech Wireless Device PID:404d Keyboard as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input8
input: Logitech Wireless Device PID:404d Mouse as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input9
hid-generic 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech Wireless Device PID:404d] on usb-0000:00:1a.0-1.6/input2:1
input: Logitech K400 Plus as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.2/0003:046D:C52B.0003/0003:046D:404D.0004/input/input13
logitech-hidpp-device 0003:046D:404D.0004: input,hidraw1: USB HID v1.11 Keyboard [Logitech K400 Plus] on usb-0000:00:1a.0-1.6/input2:1
scsi 6:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
sd 6:0:0:0: [sdd] 240328704 512-byte logical blocks: (123 GB/115 GiB)
sd 6:0:0:0: [sdd] Write Protect is off
sd 6:0:0:0: [sdd] Mode Sense: 43 00 00 00
sd 6:0:0:0: [sdd] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
sdd: sdd1 sdd2
sd 6:0:0:0: [sdd] Attached SCSI removable disk
Key type encrypted registered
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
ISO 9660 Extensions: RRIP_1991A
EXT4-fs (dm-1): mounted filesystem with ordered data mode. Quota mode: none.
EXT4-fs (dm-1): re-mounted. Quota mode: none.
DMAR: DRHD: handling fault status reg 2
DMAR: [INTR-REMAP] Request device [01:00.0] fault index 0x20 [fault reason 0x26] Blocked an interrupt request due to source-id verification failure
loop: module loaded
loop0: detected capacity change from 0 to 1349680
squashfs: version 4.0 (2009/01/31) Phillip Lougher
overlayfs: "xino" feature enabled using 32 upper inode bits.
ERST: [Firmware Warn]: Firmware does not respond in time.
systemd[1]: systemd 253.4-1-arch running in system mode (+PAM +AUDIT -SELINUX -APPARMOR -IMA +SMACK +SECCOMP +GCRYPT +GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT -QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD +BPF_FRAMEWORK +XKBCOMMON +UTMP -SYSVINIT default-hierarchy=unified)
systemd[1]: Detected architecture x86-64.
systemd[1]: Hostname set to .
systemd[1]: bpf-lsm: LSM BPF program attached
systemd[1]: Queued start job for default target Multi-User System.
systemd[1]: Created slice Slice /system/getty.
systemd[1]: Created slice Slice /system/modprobe.
systemd[1]: Created slice User and Session Slice.
systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
systemd[1]: Started Forward Password Requests to Wall Directory Watch.
systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
systemd[1]: Reached target Local Encrypted Volumes.
systemd[1]: Reached target Local Integrity Protected Volumes.
systemd[1]: Reached target Path Units.
systemd[1]: Reached target Remote File Systems.
systemd[1]: Reached target Slice Units.
systemd[1]: Reached target Swaps.
systemd[1]: Reached target Local Verity Protected Volumes.
systemd[1]: Listening on Device-mapper event daemon FIFOs.
systemd[1]: Listening on LVM2 poll daemon socket.
systemd[1]: Listening on Process Core Dump Socket.
systemd[1]: Listening on Journal Socket (/dev/log).
systemd[1]: Listening on Journal Socket.
systemd[1]: Listening on udev Control Socket.
systemd[1]: Listening on udev Kernel Socket.
systemd[1]: Mounting Huge Pages File System...
systemd[1]: Mounting POSIX Message Queue File System...
systemd[1]: Mounting Kernel Debug File System...
systemd[1]: Mounting Kernel Trace File System...
systemd[1]: Mounting Temporary Directory /tmp...
systemd[1]: Starting Create List of Static Device Nodes...
systemd[1]: Starting Monitoring of LVM2 mirrors, snapshots etc. using dmeventd or progress polling...
systemd[1]: Starting Load Kernel Module configfs...
systemd[1]: Starting Load Kernel Module dm_mod...
systemd[1]: Starting Load Kernel Module drm...
systemd[1]: Starting Load Kernel Module fuse...
systemd[1]: Starting Load Kernel Module loop...
systemd[1]: Starting Journal Service...
systemd[1]: Starting Load Kernel Modules...
systemd[1]: TPM2 PCR Machine ID Measurement was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8c4f).
systemd[1]: Starting Remount Root and Kernel File Systems...
systemd[1]: Starting Coldplug All udev Devices...
systemd[1]: Mounted Huge Pages File System.
systemd[1]: Mounted POSIX Message Queue File System.
systemd[1]: Mounted Kernel Debug File System.
systemd[1]: Mounted Kernel Trace File System.
systemd[1]: Mounted Temporary Directory /tmp.
systemd-journald[891]: Collecting audit messages is disabled.
scsi 7:0:0:0: Attached scsi generic sg0 type 12
sd 7:0:1:0: Attached scsi generic sg1 type 0
sd 7:0:2:0: Attached scsi generic sg2 type 0
sd 7:0:3:0: Attached scsi generic sg3 type 0
sd 6:0:0:0: Attached scsi generic sg4 type 0
systemd[1]: Finished Create List of Static Device Nodes.
systemd[1]: modprobe@configfs.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module configfs.
systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
systemd[1]: Finished Load Kernel Module dm_mod.
systemd[1]: Started Journal Service.
systemd-journald[891]: Received client request to flush runtime journal.
tg3 0000:03:00.3 eno4: renamed from eth3
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
power_meter ACPI000D:00: hwmon_device_register() is deprecated. Please convert the driver to use hwmon_device_register_with_info().
dca service started, version 1.12.1
tg3 0000:03:00.1 eno2: renamed from eth1
tg3 0000:03:00.0 eno1: renamed from eth0
input: PC Speaker as /devices/platform/pcspkr/input/input14
tg3 0000:03:00.2 eno3: renamed from eth2
iTCO_vendor_support: vendor-support=0
hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: NMI decoding initialized
hpwdt 0000:01:00.0: HPE Watchdog Timer Driver: Version: 2.0.4
hpwdt 0000:01:00.0: timeout: 30 seconds (nowayout=0)
hpwdt 0000:01:00.0: pretimeout: on.
hpwdt 0000:01:00.0: kdumptimeout: -1.
mousedev: PS/2 mouse device common for all mice
ioatdma: Intel(R) QuickData Technology Driver 5.00
IPMI message handler: version 39.2
mgag200 0000:01:00.1: vgaarb: deactivate vga console
Console: switching to colour dummy device 80x25
ipmi device interface
[drm] Initialized mgag200 1.0.0 20110418 for 0000:01:00.1 on minor 0
ipmi_si: IPMI System Interface driver
ipmi_si dmi-ipmi-si.0: ipmi_platform: probing via SMBIOS
ipmi_platform: ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine
ipmi_si IPI0001:00: ipmi_platform: probing via ACPI
ipmi_si IPI0001:00: ipmi_platform: [io 0x0ca2-0x0ca3] regsize 1 spacing 1 irq 0
fbcon: mgag200drmfb (fb0) is primary device
ipmi_si dmi-ipmi-si.0: Removing SMBIOS-specified kcs state machine in favor of ACPI
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x20, irq 0
iTCO_wdt iTCO_wdt.1.auto: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
RAPL PMU: API unit is 2^-32 Joules, 2 fixed counters, 163840 ms ovfl timer
RAPL PMU: hw unit of domain pp0-core 2^-16 Joules
RAPL PMU: hw unit of domain package 2^-16 Joules
Console: switching to colour frame buffer device 200x56
mgag200 0000:01:00.1: [drm] fb0: mgag200drmfb frame buffer device
ipmi_si IPI0001:00: IPMI message handler: Found new BMC (man_id: 0x00000b, prod_id: 0x2000, dev_id: 0x13)
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0ea0
EDAC sbridge: Seeking for: PCI ID 8086:0e60
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0ea8
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0e71
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eaa
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eab
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0eac
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0ead
EDAC sbridge: Seeking for: PCI ID 8086:0e68
EDAC sbridge: Seeking for: PCI ID 8086:0e79
EDAC sbridge: Seeking for: PCI ID 8086:0e6a
EDAC sbridge: Seeking for: PCI ID 8086:0e6b
EDAC sbridge: Seeking for: PCI ID 8086:0e6c
EDAC sbridge: Seeking for: PCI ID 8086:0e6d
EDAC sbridge: Seeking for: PCI ID 8086:0eb8
EDAC sbridge: Seeking for: PCI ID 8086:0ebc
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec8
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0ec9
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC sbridge: Seeking for: PCI ID 8086:0eca
EDAC MC0: Giving out device to module sb_edac controller Ivy Bridge SrcID#0_Ha#0: DEV 0000:1f:0e.0 (INTERRUPT)
EDAC MC1: Giving out device to module sb_edac controller Ivy Bridge SrcID#1_Ha#0: DEV 0000:3f:0e.0 (INTERRUPT)
EDAC sbridge: Ver: 1.1.2
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
intel_rapl_common: Found RAPL domain package
intel_rapl_common: Found RAPL domain core
ipmi_si IPI0001:00: IPMI kcs interface initialized
ipmi_ssif: IPMI SSIF Interface driver
tg3 0000:03:00.3 eno4: Link is up at 1000 Mbps, full duplex
tg3 0000:03:00.3 eno4: Flow control is on for TX and on for RX
tg3 0000:03:00.3 eno4: EEE is disabled
IPv6: ADDRCONF(NETDEV_CHANGE): eno4: link becomes ready
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
logitech-hidpp-device 0003:046D:404D.0004: HID++ 4.1 device connected.
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52
iptables-dropped: IN=eno4 OUT= MAC=d8:9d:67:2c:37:b7:28:41:c6:20:aa:05:86:dd SRC=fe80:0000:0000:0000:0000:0000:0000:0001 DST=fe80:0000:0000:0000:0622:aa9e:f2be:1977 LEN=92 TC=0 HOPLIMIT=64 FLOWLBL=0 PROTO=UDP SPT=547 DPT=546 LEN=52